Tormek T-3
Tormek Supergrind
Accessory Kits
Grinding Jigs
Accessories
Tormek Accessories
Free Shipping!
On all Tormek orders over $100.00 within the 48 states.
|
Bench Grinder Mounting Set BGM-100 For using Tormek jigs on a bench grinder. |
|
Universal Support with micro adjust US-105 For upgrading the S-2005 |
|
Woodturner's Instruction Box TNT-300
Contains TNT DVD film and detailed instruction book. Shows how to shape, sharpen and hone all your turning tools. |
 |
Truing & Dressing Tool, TT-50
With screw feed. True and dress your grindstone exactly round and flat. |
|
|
|
Truing & Dressing Tool w/o Diamond Cutter, TT-50U
If you have the existing Truing Tool ADV-50D you can purchase the TT-50 without the diamond cutting tip at a reduced price and mount your existing diamond cutting tip. |
|
Exchange Diamond Bit, ADV-D
For Diamond Truing Tools TT-50 and ADV-50D. |
 |
Stone Grader, SP-650
For grading the SuperGrind stone to finer grit. Also for renewing a glazed stone. |
|
 |
Profiled Leather Honing Wheel, LA-120
For inside bevel honing and polishing of gouges and V tools. |
|
Set of optional narrow discs, LA-124
For profiled leather honing wheel LA-120. One with radius 2 mm (3/32") and one with 45° tip. |
|
Replacement Grind Stone, SG-250
SuperGrind stone for wet grinding. With aluminumoxide. Dia. 250mm x 50mm wide. Max 150 Rpm. |
|
Blackstone Silicon Grinding Wheel, SB-250
This wheel has been developed for shaping and sharpening HSS and very hard exotic alloys. Its faster steel removal is an advantage when grinding tools with a large bevel surface like planer blades and when shaping woodturning skews. Dia. 250mm x 50mm wide. Max 150 Rpm. |
|
Japanese Waterstone Grinding Wheel, SJ-250
Tormek Japanese Waterstone delivers a mirror finish with hardly any visible grooves. It excels at sharpening hand tools where a minimum of steel removal is needed and a superior surface finish is demanded. Dia. 250mm x 50mm wide. Max 150 Rpm. |
 |
Turning Tool Setter, TTS-100
Exact replication on woodturning gouges and skews. Use with SVD-185 or SVS-50. |
|
 |
Horizontal Base for the Universal Support, XB-100
For inside honing and polishing of gouges and V tools. |
 |
Pro AngleMaster, WM-200
For setting and measuring any edge angle from 15 to 75 degrees. For any stone diameter from 250 mm (10") down to 150 mm (6"). |
|
 |
Honing Compound, PA-70
For the Leather Honing Wheels. |
 |
Machine Cover, MH-380
For protecting the machine from wood dust. |
 |
TORMEK Handbook, HB-10E
The book gives you useful hints and describes the unique TORMEK method of grinding, sharpening and honing and how to work with it. |
|
TORMEK Instruction DVD, DVD-1 NTSC
This film of the Tormek system is divided into three sections: Introduction, Jigs & Accessories and Latest Innovations. |
