Loading
Robert Sorby Parting Tools
Every woodturner needs at least one parting tool when doing spindle turning. In fact, most turners would say that the parting tools is the most used turning chisel when turning spindles. Parting tools are used not just to cut off the work but also for sizing when you are duplicating a piece. All of the parting tools offered here are made from Robert Sorby's high-speed steel.
| Robert Sorby Standard Parting Tools
This is a V shaped parting tool with flat sides. 
| |||||
| Stock # | Description | Size | Price | Qty | Buy |
| 830H-1/8 | Robert Sorby Parting Tool Length 13-1/4", Handle Length 8 1/2" |
1/8" | $41.95 | ||
| 830H-1/4 | Robert Sorby Parting Tool Length 17", Handle Length 10" |
1/4" | $44.95 | ||
| Robert Sorby Sizing Tool
This tool clamps onto your parting tool to allow accurate sizing of spindles. Normally used in duplication work. Fits all of the Robert Sorby parting tools on this page except for the 832 series fluted parting tools and the 830SH slim parting tool. 
Click on Image to Expand |
|||||
| Stock # | Description | Price | Qty | Buy | |
| 970 | Robert Sorby sizing Tool | $29.95 | |||
| Robert Sorby Slim Parting Tool
This is a special small cut-off tool that wastes very little wood. 
| |||||
| Stock # | Description | Size | Price | Qty | Buy |
| 830SH | Robert Sorby Slim Parting Tool Length 10-1/2", Handle Length 5 3/4" |
1/16" | $28.95 | ||
| Robert Sorby Diamond Parting Tools
This is a V shaped parting tool with bevelled sides that allow better clearance and less binding. 
| |||||
| Stock # | Description | Size | Price | Qty | Buy |
| 831H-3/16 | Robert Sorby Parting Tool Length 17", Handle Length 10" |
3/16" | $62.95 | ||
| Robert Sorby Fluted Tools
Fluted parting tools cut more cleanly and quickly, but they are not suitable for use in sizing. These are the preferred tool for cut-off. 
|
|||||
| Stock # | Description | Size | Price | Qty | Buy |
| 832H-1/16 | Robert Sorby Fluted Parting Tool Length 18 1/2", Handle Length 12" |
1/16" | $52.95 | ||
| 832H-3/16 | Robert Sorby Fluted Parting Tool Length 18 1/2", Handle Length 12" |
3/16" | $62.95 | ||
| Robert Sorby Beading & Parting Parting Tools
This chisel can be used as a wide parting tool or on its side for beading work. 
| |||||
| Stock # | Description | Size | Price | Qty | Buy |
| 833H-3/8 | Robert Sorby Beading and Parting Tool Length 19", Handle Length 12" |
3/8" | $44.95 | ||
| Robert Sorby Bedan Parting Tools
This parting chisel has tapered sides so that it can be used for plunge cutting into bowls without binding. Can also be as a heavy duty parting tool for spindle turning. 
| |||||
| Stock # | Description | Size | Price | Qty | Buy |
| 834H-3/8 | Robert Sorby Bedan Parting Tool Length 19", Handle Length 12" |
3/8" | $49.95 | ||
