Kapex Miter Saw
Festool Kapex KS 120 Sliding Compound Miter Saw
Order Below
There are many good reasons to make the Kapex KS 120 your next sliding compound miter saw: lightweight, superb dust extraction capabilities, micro-bevel adjustments, large scales, variable speed, quick release fences, dual laser guides, and FastFix blade changes, to name a few.
The Festool Kapex KS 120 has a small footprint and compact design with a great amount of power. It has the cutting capacity of a 12" unit and is capable of cutting trim molding almost 4 3/4" tall in the special cutting position, and hardwoods greater than 3" thick, smoothly and precisely.
Most miter saws are not designed to cut anything but wood, but with variable speed capability, the Kapex allows you to match the speed of the blade with the requirements of the material. Efficient dust extraction is a foremost consideration in the design of the Kapex, allowing you to focus on your work, not on cleaning up. The saw comes with an angle transfer device and dual laser guides to eliminate complex angle calculations by copying the angle directly from you wall to the saw.
Faster
- Faster cut alignments with dual-laser marking system.
- Rapid miter setting with cam-action lock system.
- Fast-Fix blade change system for rapid blade changes.
Easier
- Rail-forward design allows you to work in tight quarters.
- Angle transfer device eliminates complex angle calculations.
- Easy and precise bevel angle setting with counter spring system and fine adjustment.
Smarter
- 12" miter saw capacity in a 10" miter saw design.
- Attention to air flow and system componenets delivers highly efficient dust extraction.
| Power consumption: | 1600 Watts / 13 amps |
| Speed: | 1400 - 3400 rpm |
| Cutting depth 90°/90°: | 12" x 3 15/32" (305 x 88 mm) |
| Left/right 45°/90°: | 8 15/32" x 3 15/32" (215 x 88 mm) |
| Left 45°/45°: | 8 15/32" x 2 1/8" (215 x 55 mm) |
| Right 45°/45°: | 8 15/32" x 1 3/8" (215 x 35 mm) |
| Special cutting depth: | 4 23/32" x 3/4" (120 x 20 mm) |
| Crown nested capacity: | 6 5/8" (168 mm) |
| Max bevel: | 47°/47° |
| Miter range: | 50°/60° |
| Dimensions (WxDxH): | 28" x 19 3/4" x 18 1/2" (713 x 500 x 470 mm) |
| Dust port: | 1" (27 mm) and 1 7/16" (36 mm) |
| Weight: | 47 lbs. (21.5 kg) |
Free Shipping!
On all Festool orders over $100.00 within the 48 states.
Contact us for a shipping discount to other destinations.
| Item # | Description | Image Click to enlarge | Price | Qty | Buy |
| 561287 | Kapex Miter Saw KS 120 EB Includes: Kapex Saw, High quality carbide blade 60 tooth, Angle transfer device, Hold down clamp and Wrench. |
; void('');) | $1300.00 | ||
| P2561287 | Kapex Miter Saw & CT 22 Dust Extractor Includes: Item No. 561287 & 583366 $49.00 Package Savings |
; void('');) | $1741.00 | ||
| P3561287 | Kapex Miter Saw & CT 33 Dust Extractor Includes: Item No. 561287 & 583368 $56.00 Package Savings |
; void('');) | $1804.00 | ||
| PT3K561287 | Kapex Miter Saw & MFT/3-Kapex Multifunction Table Includes: Item No. 561287 & 495565 $37.50 Package Savings |
; void('');) | $1637.50 | ||
| 33301-PL | Nobex Multifix Miter Gauge This is not a Festool product, it is made in Sweden by the Nobex Company. Measures any corner and transfers the correct mitre angle directly to your mitre saw or cutting machine. Multifix will give you the exact angle for any corner internal or external and convert it to the precise cutting angle. |
; void('');) | $44.95 | ||
| 494369 | Crown stop with base extension Crown stops support nested workpieces at any angle. Base extensions provide enhanced material support to the left or right, and enable additional clamping possibilities when used with Festool FS clamps (2 needed). |
; void('');) | $85.00 | ||
| 494370 | Angle transfer device Replacement. For transferring angles to the miter saw from inside or outside corners. |
; void('');) | $140.00 | ||
| 494391 | Hold down clamp Replacement. For securing material, to be used on the left or right. |
; void('');) | $65.00 | ||
| 494693 | Clamping Kit For securing Kapex to multifunction table. Pack of 2. |
; void('');) | $17.50 | ||
| 489790 | FS-Rapid clamp and fixed jaws For clamping and positioning with Festool guide rails - includes fixed jaws and clamping jaws. Pack of 1. |
; void('');) | $40.00 | ||
| 491594 | Quick clamp Easily locked and quickly released - for use with MFT and guide rails. Pack of 1. |
; void('');) | $36.00 | ||
| 495565 | MFT/3-Kapex Multifunction Table A specially designed height and size for use with the Kapex sliding compound miter saw. |
; void('');) | $375.00 | ||
| 494604 | Universal saw blade Carbide-tipped, ATB saw blade for clean cuts in wood and soft plastics. Length: 260mm - Kerf: 2.5mm - Bore: 30mm - Tooth shape: ATB - Teeth: 60 - Speed range: 3-6 |
; void('');) | $115.00 | ||
| 494605 | Fine tooth saw blade Carbide-tipped, ATB saw blade for fine cuts, especially casing and molding. For wood and soft plastics. Length: 260mm - Kerf: 2.5mm - Bore: 30mm - Tooth shape: ATB - Teeth: 80 - Speed range: 3-6 |
; void('');) | $128.00 | ||
| 494606 | Laminate saw blade Carbide-tipped, TC saw blade, specially designed for cutting laminate. Length: 260mm - Kerf: 2.5mm - Bore: 30mm - Tooth shape: TC - Teeth: 64 - Speed range: 3-5 |
; void('');) | $120.00 | ||
| 494607 | Aluminum/plastic saw blade Carbide-tipped, TC saw blade, for cutting non-ferrous metals, especially aluminum. Also for acrylics and hard plastics. Length: 260mm - Kerf: 2.5mm - Bore: 24mm - Tooth shape: TC - Teeth: 68 - Speed range: 2-4 |
; void('');) | $122.00 | ||
| M0064 | Woodworking Apron & Mini-Systainer - Special Offer The apron features a fully adjustable belt with quick-release buckle, 12 oz. 100% cotton duck, dual hammer loops, adjustable neck strap and bar-tacked reinforcements. Packed in a a handy Minisystainer, which can be used to store pencils, tape measures and other small items to keep your shop space clean and well organized. |
; void('');) | $36.00 |
