Woodworking Videos & DVDs
All of these videos & DVDs take you right into an expert woodworker's shop. You'll see firsthand exactly how to do the work - the tools, the techniques and the subtle rhythms that make for skillful woodworking. You can pause the tape to practice, and you can replay each demonstration as often as you want. Much more than mere entertainment, these videos are private lessons in craftsmanship that you take in your own home, at your own pace.
 |
Bandsaw Tuning - DVD with Alex and Howard Snodgrass A step by step tutorial on the correct way to set-up most 14" or larger two wheel bandsaws.
DVD |
| Price $17.95 |
 |
Bench Planes with Jim Kingshott Woodworkers looking to increase their building productivity will be guided through the use, techniques, and construction of bench planes in this valuable DVD.
75 minutes. DVD. |
| Price $18.95 |
 |
Bowl Turning - DVD with Del Stubbs Del Stubbs shows you how to turn beautiful bowls and plates. You can start with dry lumber or with green wood you cut yourself. The camera zooms in close to see the careful contact of edge on wood...
120 minutes. DVD. |
| Price $17.95 |
 |
Build a Shaker Table - DVD with Kelly Mehler Want to build your own Shaker-style dining table? You can -- once you've watched how furniture maker Kelly Mehler handles the task. You'll watch a skilled craftsman organize the entire process of making...
76 minutes - DVD |
| Price $17.95 |
 |
Carving Techniques and Projects - DVD with Sam Bush and Mack Headley A solid foundation in traditional methods. Now you can acquire the satisfying skill of carving wood. In this tape you'll discover the basics of woodcarving, see how to carve an 18th-century scallop shell and gain an understanding of the production techniques of that era.
85 minutes. DVD. |
| Price $17.95 |
 |
Chip Carving - DVD with Wayne Barton Chip carving is a wonderfully direct and simple way to decorate furniture, cabinets, boxes, plaques and utensils.
55 minutes. DVD. |
| Price $17.95 |
 |
Dovetail a Drawer - DVD with Frank Klausz If it's properly fitting drawers you're after, this is the video workshop for you. Frank Klausz cuts, quick, precise dovetails without jigs or templates, then glues up and fits the finished drawer.
55 minutes. DVD. |
| Price $17.95 |
 |
Dovetails Made Simple with Jim Kingshott Produced for woodworkers of all skill levels, this guide is a bare wood-to-finished piece primer on the production of handcut dovetail joints-the hallmark of a fine woodworker's repertoire.
60 minutes. DVD. |
| Price $18.95 |
 |
Eccentric Chuck Projects with Robert Sorby A step by step guide on making four exciting projects using the Robert Sorby Eccentric Chuck.
Interactive CD Video - Auto-Run CD for PCs. Most DVD players will also play this format. |
| Price $19.95 |
 |
Frame & Panel Construction - DVD with Graham Blackburn This DVD is a compilation of two Video Workshops: Frame and Panel 1: Making and Joining the Frame and Frame and Panel 2: Panel Raising..
40 minutes. DVD. |
| Price $17.00 |
 |
Hand-Applied Finishes - DVD with Jeff Jewitt Get perfect hand-applied finishes, with technique advice from a pro finisher
80 minutes. DVD. |
| Price $17.95 |
 |
Hand Saw Sharpening - DVD with Tom Law Rediscover the lost art of hand filing in Hand Saw Sharpening with Tom Law.
DVD |
| Price $24.95 |
 |
Hand Tools - DVD with Frank Klausz Tuning and Using Chisels, Planes and Saws.
60 minutes. DVD. |
| Price $17.95 |
 |
Making Mortise-and-Tenon Joints - DVD with Frank Klausz Produce clean and quick joints, by hand or machine. Frank Klausz shows you how.
60 minutes. DVD. |
| Price $17.95 |
 |
Mastering Your Bandsaw - DVD with Mark Duginske Through his books and magazine articles and in seminars across the country, Mark Duginske has helped thousands of bandsaw owners tweak their wayward machines into precision tune.
57 minutes. DVD. |
| Price $17.95 |
 |
Mortise and Tenon Made Simple with Jim Kingshott The mortise and tenon joint is the key to making sturdy chairs, tables, windows, and doors, and this instructional video illustrates how to make these joints precisely and quickly.
75 minutes. DVD. |
| Price $18.95 |
 |
Specialist Woodturning Tools - Part 1 with Robert Sorby See how to make the most of the Hollowmaster, Chattertool, Spindlemaster, Multi Tip Hollowing Tool, and Sandmaser. Each product demonstrated and explained. Includes advice on sharpening.
Interactive CD Video - Auto-Run CD for PCs. Most DVD players will also play this format. |
| Price $19.95 |
 |
Specialist Woodturning Tools - Part 2 with Robert Sorby More unique tools are shown and explained. Covers Easybeader, Stebcentres, Hardwood Scraper, Universal Sharpening System. Includes some novel projects.
Interactive CD Video - Auto-Run CD for PCs. Most DVD players will also play this format. |
| Price $19.95 |
 |
Special Planes with Jim Kingshott Because the hand plane is an essential part of the woodworker's toolbox that can add style and elegance to any project, this instructional video explains in detail how to successfully set up and use many different types of planes.
90 minutes. DVD. |
| Price $18.95 |
 |
Starting Wood Turning with Robert Sorby Tool selection, tool use and care, wood selection and finishing are just some of the topics covered as the viewer is taken through some initial steps in starting-out woodturning. It is a must for those who are new to woodturning and are looking for help and guidance.
Interactive CD Video - Auto-Run CD for PCs. Most DVD players will also play this format. |
| Price $19.95 |
 |
Thread Cutting with Robert Sorby Thread cutting is one of the most difficult techniques the woodturner has to master. This video is full of useful advise and hints on how to add threads to your project. Includes basic threaded projects.
Interactive CD Video - Auto-Run CD for PCs. Most DVD players will also play this format. |
| Price $19.95 |
 |
Turning Boxes - DVD with Richard Raffan Internationally acclaimed woodturner Richard Raffan demonstrates how to make turned boxes with suction-fit lids in this DVD. Raffan reveals the tricks you need to know when turning boxes and...
55 minutes. DVD. |
| Price $17.95 |
 |
Turning Projects - DVD with Richard Raffan There's no end to the variety of useful objects you can turn once you see Richard Raffan at his lathe. In this DVD, you'll learn to select the wood species best suited for a wide variety of turning projects.
87 minutes. DVD. |
| Price $17.95 |
 |
Turning Wood - DVD with Richard Raffan Richard Raffan demonstrates the moves that are so important to skillful woodturning. Then he leads you through six useful projects from his companion book, Turning Wood with Richard Raffan.
114 minutes. DVD. |
| Price $17.95 |
 |
Wood Finishing - DVD with Frank Klausz A master woodworker covers the essential techniques. Frank Klausz shows you how to choose the right finish and how to apply it.
105 minutes. DVD. |
| Price $17.95 |
 |
Wood Finishing Basics - DVD with Michael Dresdner In this DVD, finishing expert Michael Dresdner shows you what you need to know to become a proficient wood finisher.
65 minutes. DVD. |
| Price $17.95 |
 |
Wood Finishing and Repair Interactive Training System This DVD is designed to teach you the most up-to-date wood finishing and repair techniques offered in the industry.
DVD. |
 |
Woodworking Profile of Sam Maloof Sam Maloof is one of the fathers of contemporary woodworking. Now in this video profile of a master craftsman, you can see Maloof at work and at home, and see how his furniture embodies his ideas on craft, design and technique.
55 minutes. VHS. |
| Price $8.95 SALE! |
 |
Woodworking Profile of Sam Maloof - DVD Sam Maloof is one of the fathers of contemporary woodworking. Now in this DVD profile of a master craftsman, you can see Maloof at work and at home, and see how his furniture embodies his ideas on craft, design and technique.
55 minutes. DVD. |
| Price $17.95 |
 |
Woodworking Profile of Tage Frid - DVD Tage Frid is known as the "Dean of American Woodworking". Over his 50-year career as a woodworker, educator and author, he helped thousands learn woodworking.
75 minutes. DVD. |
| Price $17.95 |
